 CUSTOMIZED
STAINLESS STEEL TUBING
Greenville
Stainless Steel Tube provides quick delivery of made
to order Small Diameter Stainless Steel Tubing. This
stainless steel tubing can both be cold drawn seamless
or welded tubing and range in size from 1/8th inch to
1-1/2th inch outside diameter with varying wall thickness
in lengths up to 100 feet. All stainless steel tubing
is manufactured in accordance with ASTM and ASME specifications.
Greenville Tube can also manufacture stainless steel
pipe from 1/8th inch to 1 inch IPS.
REFER
TO RESOURCES FOR TECHNICAL INFORMATION
Greenville
Stainless Steel Tube carries nearly all grades of Series
300 including 304, 310, 316, 317, 321 and 347.
In addition Greenville Tube offers other grades such
as 200, 400, 600, 625, 800, 825, and 2205 Duplex.
There is no minimum or maximum tubing footage required
when it comes to order sizes. Further, Greenville Tube
can provide an"As Welded" tube in 1/4, 3/8,
and 1/2 inch with a .035 wall thickness in 304 and 316
Series Stainless Steel.
Greenville
Stainless Steel Tube can manufacture many of the standard
stainless steel tubing sizes and traditional tubing
grades with no problem. However, the company has the
additional advantage of being able to manufacture High
Quality precision steel tubing in odd lots, which requires
no minimum, odd sizes referring to unusual OD, ID or
wall thickness requirements, and off grades such as
310, 317, 321, 347, 200, 400, 600, 625, 800,
825 and 2205. All of this delivered within
your time constraints.
Greenville
Tube has established itself as a leader in providing
stainless steel tubing products. Offering a broad product
line with prompt delivery allows the company to become
the preferred supplier for many industries.
Greenville
Stainless Steel Tube specializes in making a
custom stainless
steel tube.
As a result, odd tube sizes are no problem.
Greenville Tube can manufacture practically
any tubing dimension required within our size
range.
|
Stainless
Steel Tubing is ordinarily ordered to outside
diameter and wall thickness, If inside diameter
is the more important dimension, stainless steel
tubing should be ordered to OD and ID dimensions.
Tolerances in any tube are applicable only to
two cross-sectional dimensions. Thus, if outside
diameter and wall thickness are specified, the
inside diameter may not necessarily conform to
published tolerances. Unless otherwise specified,
stainless steel tubing tolerances will be in accordance
with ASTM & ASME specifications.
- Steel
Tubing from 1/8" to 1-1/2" OD, wall
thickness from .010 to .188, lengths to 100'
- Pipe
from 1/8" to 1" IPS, Schedule #80,
#40, #10, and #5
|
|
