 The
company provides quick delivery of made to order Small
Diameter Stainless Steel Tubing. This tubing can both
be cold drawn seamless or welded and range in size
from 1/8th inch to 1-1/2th inch outside diameter with
varying wall thickness in lengths up to 100 feet. All
products are manufactured in accordance with ASTM and
ASME specifications. Greenville can also manufacture
stainless steel pipe from 1/8th inch to 1 inch IPS.
REFER
TO RESOURCES FOR TECHNICAL INFORMATION
The
company carries nearly all grades of Series 300 including
304, 310, 316, 317, 321 and 347. In addition Greenville
offers other grades such as 200, 400, 600, 625, 800,
825, and 2205 Duplex. There is no minimum or maximum
footage required when it comes to order sizes. Further,
the company can provide an"As Welded" tube
in 1/4, 3/8, and 1/2 inch with a .035 wall thickness
in 304 and 316 Series Stainless. Greenville
can manufacture many of the standard sizes and traditional
grades with no problem. However, the company has the
additional advantage of being able to manufacture High
Quality precision tubing in odd lots, which requires
no minimum, odd sizes referring to unusual OD, ID or
wall thickness requirements, and off grades such as
310, 317, 321, 347, 200, 400, 600, 625, 800, 825 and
2205. All of this delivered within your time constraints.
Greenville
Tube has established itself as a leader in providing
stainless steel tubing products. Offering a broad product
line with prompt delivery allows the company to become
the preferred supplier for many industries.
Greenville
specializes in making a custom tube.
As a result, odd sizes are no problem.
The company can manufacture practically
any tubing dimension required within
our size range.
|
Tubing
is ordinarily ordered to outside diameter and wall
thickness, If inside diameter is the more important
dimension, tubing should be ordered to OD and ID
dimensions. Tolerances in any tube are applicable
only to two cross-sectional dimensions. Thus, if
outside diameter and wall thickness are specified,
the inside diameter may not necessarily conform
to published tolerances. Unless otherwise specified,
tolerances will be in accordance with ASTM & ASME
specifications.
- Tubing
from 1/8" to 1-1/2" OD, wall thickness
from .010 to .188, lengths to 100'
- Pipe
from 1/8" to 1" IPS, Schedule #80,
#40, #10, and #5
|
|
